Quinn Garland Set speakers to Small and start at 80 Hz if you have a subwoofer. Here’s what the size and crossover settings really do, how to choose a frequency, and how to avoid a silent sub.
One RCA cable from the receiver’s subwoofer output to the sub’s LFE input is all it takes. Here’s how to set the sub’s knobs, enable it on popular receivers, add a second sub and fix silence.
ARC and eARC both send TV sound back to your receiver, but only eARC carries lossless formats like Dolby TrueHD and DTS:X. Here’s when that matters and when plain ARC is enough.
The AVR-S960H can receive Bluetooth from your phone or send sound out to wireless headphones, but not both at once. Here’s how to set up each and fix what gets in the way.
Get the AVR-S960H on your home network with Scan Networks, an iPhone, WPS, a web browser, or a cable, then find it in the HEOS app. Includes fixes when it won’t connect.
Audyssey Setup on the AVR-S960H measures up to six spots around your seat and tunes every speaker. Here’s how to prepare the room, run each screen, and fix common errors.
The AVR-S960H updates over your home network from SETUP > General > Firmware. Here’s how to run an update, set it to update on its own, and recover if an update fails.
Hold TUNER PRESET CH + and CH – while pressing power, and the AVR-S960H returns to factory settings. Here’s how to back up first, reset only the network instead, and rebuild your setup afterward.
Wire a second room to the Onkyo TX-NR6100, change the right Speaker setting, run it from the remote or front panel, and understand which sources can play in Zone 2.
How to prepare, place the mic, and run AccuEQ Room Calibration on the TX-NR6100, including how to rerun it later, fine-tune the results, and fix the errors Onkyo documents.