How to Set Up Zone 2 on the Yamaha RX-V685

To set up Zone 2 on a Yamaha RX-V685, connect a pair of speakers in the second room to the EXTRA SP1 or EXTRA SP2 terminals and set SETUP > “Speaker” > “Power Amp Assign” to match. Or send a line-level signal from the ZONE OUT jacks to a separate amplifier. Then slide the remote’s MAIN/ZONE 2 switch to “ZONE 2,” press the power key, and pick an input. “ZONE2” lights up on the front display when it’s working.

Zone 2 on the RX-V685 is stereo, and it has two catches worth knowing before you run wire. If you power the second room with the receiver’s own amplifier, you give up two speakers in your main room whenever Zone 2 is on. Also, Zone 2 can’t play an HDMI input directly. Party mode is the workaround for that, and it’s covered below.

Pick your wiring method first

The right method depends on your main-room speaker layout and whether you want to buy another amplifier.

Three RX-V685 Zone 2 wiring options: EXTRA SP1 with Power Amp Assign 7.1 +1Zone, EXTRA SP2 with 5.1.2 +1Zone, or ZONE OUT to an external amplifier
The built-in options borrow two of the main room’s amplifier channels. An external amp on ZONE OUT doesn’t.
Main roomZone 2 speakers connect toPower Amp AssignTrade-off
7.1 (with surround back speakers)EXTRA SP1 terminals7.1 +1ZoneSurround back speakers go silent while Zone 2 is on
5.1.2 (with front presence speakers)EXTRA SP2 terminals5.1.2 +1ZonePresence speakers go silent while Zone 2 is on
Any layoutAn external amplifier, fed from ZONE OUTNo Zone 2 setting neededYou need a second amp, but the main room keeps every speaker

Yamaha’s product page calls the built-in option Intelligent Amp Assign. The receiver has seven amplifier channels, and two of them get borrowed for the second room when Zone 2 turns on.

Method 1: Use the receiver’s built-in amplifier

Unplug the receiver’s power cable from the wall before you connect any speakers. Yamaha lists this as a required first step.

  1. Run speaker wire from the second room’s left and right speakers to the receiver.
  2. Connect them to EXTRA SP1 if your main room is 7.1 with surround back speakers. Connect them to EXTRA SP2 if your main room is 5.1.2 with front presence speakers. Match + to + and – to -. Our speaker wiring guide covers bare wire, pins and banana plugs.
Zone 2 speaker wires connected to the EXTRA SP1 terminals on the Yamaha RX-V685
Generated illustrative recreation. Use EXTRA SP1 for a 7.1 main room or EXTRA SP2 for a 5.1.2 main room.
  1. Plug the receiver back in and turn it on. Switch the TV to the receiver’s input so you can see the menu.
  2. Press SETUP on the remote.
  3. Select “Speaker,” then “Power Amp Assign,” and press ENTER.
  4. Choose “7.1 +1Zone” (Zone 2 on EXTRA SP1) or “5.1.2 +1Zone” (Zone 2 on EXTRA SP2). The factory setting is “Basic,” which doesn’t use Zone 2 speakers at all.
Yamaha RX-V685 Power Amp Assign set to 7.1 +1Zone
Recreated menu. Pick the +1Zone option that matches the terminals you wired.
  1. Press SETUP to close the menu.

With either of these settings, the Zone 2 “Volume” setting switches to “Variable” automatically, so you control the second room’s level from the receiver. If you moved any main-room speakers to different terminals along the way, run YPAO again so the receiver measures the setup you actually have.

Method 2: Use an external amplifier

This keeps all seven of the receiver’s amplifier channels in your main room. The ZONE OUT jacks send a stereo signal that another amplifier boosts for the Zone 2 speakers.

  1. Unplug the receiver’s power cable from the wall.
  2. Connect the receiver’s ZONE OUT jacks (L and R) to an input on the Zone 2 amplifier with a stereo pin cable.
RCA cable connected to the ZONE OUT jacks on the Yamaha RX-V685
Generated illustrative recreation. Run a stereo RCA cable from ZONE OUT to the external amplifier’s input.
  1. Connect the Zone 2 speakers to that amplifier.
  2. Plug the receiver back in and turn on both units.
  3. Decide who controls the volume. If you want to use the receiver’s remote, leave the Zone 2 “Volume” setting on “Variable” (the default). If your amplifier has its own volume knob and you’d rather use that, press SETUP and set “Multi Zone” > “Zone2” > “Volume” to “Fixed,” as Yamaha recommends.

Optional: have the amplifier turn on by itself

If your Zone 2 amplifier has a trigger input, connect it to the receiver’s TRIGGER OUT jack. Then set SETUP > “System” > “Trigger Output” > “Target Zone” to “Zone2.” With “Trigger Mode” on “Power,” the trigger follows Zone 2’s power, so the amp can switch on and off with it.

How to turn on Zone 2 and play something

Four steps to play Zone 2 from the RX-V685 remote: slide MAIN/ZONE 2 to ZONE 2, press power, pick a non-HDMI input, set the volume
Everything the remote does follows the MAIN/ZONE 2 switch, so slide it back when you’re finished.

With the remote

  1. Slide the MAIN/ZONE 2 switch on the remote to “ZONE 2.” From now on, the remote controls the second room.
  2. Press the power key (receiver power). Zone 2 output turns on, and “ZONE2” lights up on the front display. Each press turns Zone 2 on or off.
  3. Press an input selection key to choose a source. Press NET repeatedly to step through the network sources.
  4. Start playback on the device, or pick a radio station.
  5. Use VOLUME and MUTE to set the Zone 2 level.
  6. Slide the switch back to “MAIN” when you’re done. If you leave it on “ZONE 2,” the remote won’t control your main room. Yamaha lists this as a cause of “the remote doesn’t work.”

The remote’s SLEEP key also works for Zone 2 (120, 90, 60 or 30 minutes, or off), and ENHANCER turns the Compressed Music Enhancer on or off for that room.

With the front panel

  1. Press ZONE 2 on the front panel to turn Zone 2 output on or off.
  2. Press ZONE CONTROL to point the front-panel keys and knobs at Zone 2 instead of the main room.
Yamaha RX-V685 front panel with the ZONE 2 and ZONE CONTROL buttons highlighted
Generated illustrative recreation. Press ZONE CONTROL so the front-panel keys and knob control Zone 2.
  1. Use the INPUT keys and the VOLUME knob to choose a source and set the level.
  2. Press ZONE CONTROL again to go back to controlling the main room.

There’s no on-screen TV menu for Zone 2. Yamaha says to use the front display to see what Zone 2 is doing.

What Zone 2 can and can’t play

Yamaha says digital and analog sources, FM/AM radio, Bluetooth, USB and network sources can all play in Zone 2. The limits are what trip people up.

SourcePlays in Zone 2?
FM/AM radioYes
Devices on the AUDIO jacks (AV 1-2, AUDIO 1-5, PHONO)Yes. Yamaha says external devices must be connected to these jacks to play in Zone 2.
Network sources, USB, BluetoothYes, but the two zones can’t each pick their own. Yamaha: “You cannot select Bluetooth, USB and network sources exclusively for each zone.”
AirPlayOnly while AirPlay is already playing in the main zone
HDMI inputs (Blu-ray, streaming box, TV)Not as a Zone 2 input. Use party mode to send the main room’s sound.
DSD audioOnly with “Main Zone Sync” or party mode
DTS-CDsNever. Yamaha warns they can cause unexpected noise in Zone 2.

Main Zone Sync and party mode

Main Zone Sync is an input choice for Zone 2. When you select it, Zone 2’s input follows whatever you select in the main room.

Party mode sends the main room’s audio to Zone 2 whatever the signal type, which is how you get a Blu-ray or streaming box into the second room. Multichannel sources are mixed down to two channels for Zone 2. Press PARTY on the remote to turn it on or off.

Two things to know about party mode. First, Yamaha says stereo playback is automatically selected for all zones, so your main room drops to stereo too while it’s on. Second, if the PARTY key does nothing, check SETUP > “Multi Zone” > “Party Mode Set.” It needs to be “Enable,” which is the factory setting.

Zone 2 settings worth adjusting

Press SETUP and go to “Multi Zone” > “Zone2.” These change only the second room.

SettingOptionsDefaultWhy you’d change it
VolumeVariable, FixedVariableChoose Fixed when an external amp’s knob sets the level
Max Volume-60.0 dB to +10.0 dB, in 5 dB steps+10.0 dBPut a ceiling on a bedroom or patio
Initial VolumeOff, On Mute, or -80.0 dB to +10.0 dBOff (last level used)Start at a sensible level every time
Audio Delay0 to 100 ms0 msLine Zone 2 up with the main room when you can hear both
MonauralOff, OnOffSpeakers far apart, or a single speaker
Enhancer, Tone Control, Extra Bass, BalanceVariousOn, Auto, Off, 0Fine-tune the sound in the second room

Max Volume and Initial Volume can’t be changed while “Volume” is “Fixed.” Initial Volume also has to be lower than Max Volume to take effect. Under “Multi Zone” you’ll also find “Zone Rename” to give Zone 2 a name like “Patio,” and “Information,” which shows Zone 2’s on/off status, input, volume and tone settings.

Troubleshooting Zone 2

No sound in the second room

  • Zone 2 isn’t on. Look for “ZONE2” on the front display. If it isn’t lit, slide the remote switch to “ZONE 2” and press power.
  • Pure Direct is on. Yamaha says the multi-zone function can’t be used while Pure Direct is on. Press PURE DIRECT to turn it off.
  • The source is an HDMI input. Pick a supported source, or use party mode.
  • Power Amp Assign is still “Basic.” Speakers on EXTRA SP1 or SP2 need “7.1 +1Zone” or “5.1.2 +1Zone,” matching the terminals you used.
  • The volume is down or muted. Check “Initial Volume” (is it “On Mute”?) and “Max Volume.” With an external amp, make sure the amp is on and turned up.

Your main-room surround back or presence speakers stopped working

That’s expected with the built-in amp method. Those speakers go silent while Zone 2 is on and come back when you turn Zone 2 off. If you need both at once, switch to an external amp on ZONE OUT.

The remote won’t control the main room

The MAIN/ZONE 2 switch is still on “ZONE 2.” Slide it back to “MAIN.”

You want to control Zone 2 from another room

Yamaha documents two routes. You can connect an infrared receiver/emitter to the REMOTE IN/OUT jacks so remotes work from Zone 2. Or use the MusicCast app on your phone, which Yamaha says can turn on the zone function and select inputs and basic volume for secondary zones. The app needs the receiver on your network first; see our RX-V685 Wi-Fi guide.

Yamaha’s manual covers these steps in Playing back music in multiple rooms and Controlling Zone2.

More guides for the Yamaha RX-V685