Speaker Size and Crossover Settings on an AV Receiver, Explained
Set speakers to Small and start at 80 Hz if you have a subwoofer. Here’s what the size and crossover settings really do, how to choose a frequency, and how to avoid a silent sub.
Set speakers to Small and start at 80 Hz if you have a subwoofer. Here’s what the size and crossover settings really do, how to choose a frequency, and how to avoid a silent sub.
One RCA cable from the receiver’s subwoofer output to the sub’s LFE input is all it takes. Here’s how to set the sub’s knobs, enable it on popular receivers, add a second sub and fix silence.
Audyssey Setup on the AVR-S960H measures up to six spots around your seat and tunes every speaker. Here’s how to prepare the room, run each screen, and fix common errors.
Where to put each speaker, how to wire it, how to run the S570BT’s microphone-based Auto Setup, and which Manual Setup values to double-check afterward.
The front-panel reset for the Sony STR-DH790, what CLEARING and CLEARED * mean, when a reset is the wrong fix, and the 7.2-channel settings to rebuild afterward.
Hold the power button on the receiver for 5 seconds while it’s off, then wait for CLEARED. Here’s what that erases, the gentler sound-field reset, and what to redo afterward.
Find step-by-step help for six popular AV receivers from Sony, Yamaha, Denon, and Onkyo, plus general guides that apply to any receiver. Each guide covers one task: what the setting does, the exact menu path from the manufacturer’s manual, what you should see when it works, and what to check when it doesn’t. Menu names … Read more
Practical AV receiver help Step-by-step guides that answer one specific question each, using the menu paths and button names from the manufacturer’s own documentation. Search by model or problemSearch Pick your receiver Find the model name on the front panel or the label on the back. Common jobs Connect to your TV (ARC / eARC)Fix … Read more
If your TV shows no picture or “No Signal” through an Onkyo TX-NR6100, switch the TV to the HDMI input the receiver is plugged into, make sure that cable comes from the receiver’s HDMI OUT MAIN jack, and press the receiver’s input button for the device you’re playing. If the receiver’s display says “Resolution Error,” … Read more
The TX-NR6100 can receive Bluetooth from your phone and send audio to Bluetooth headphones. Here’s how to set up each direction, what the limits are, and how to fix pairing problems.