How to Set Up and Customize Inputs on the Denon AVR-S570BT

The Denon AVR-S570BT has no setting to rename or hide inputs. Its Inputs menu has only three items: Input Assign, Source Level, and Input Select. To make the inputs work the way you want, plug each device into the HDMI input named for it, move the optical and coaxial jacks to the right source under SETUP > Inputs > Input Assign, and save your favorite sources to the QUICK SELECT 1–4 buttons.

Other Denon receivers do have these features. The step-up AVR-S960H, for example, has Source Rename and Hide Sources menus. The S570BT’s manual lists neither one. What it does give you is covered below: which jack feeds which input, how to reassign the digital audio jacks, how to even out volume between devices, and how to turn a Quick Select button into a one-press shortcut.

Can you rename or hide inputs on the S570BT?

No. Here’s the complete Inputs menu, as Denon’s manual lists it:

  • Input Assign: choose which source uses each optical and coaxial jack
  • Source Level: raise or lower the volume of one input
  • Input Select: choose which kind of audio connection an input uses, and how digital audio is decoded

Nothing else in the Setup menu edits source names, and there’s no option to skip an input you don’t use. Each input keeps its built-in name on the display.

The practical workaround is to use the input names as they are. If your streaming stick is plugged into the Blu-ray input, it will show as “Blu-ray.” That works fine. Just remember the mapping, or better, save that input to a Quick Select button so you never have to hunt for it.

Which jack feeds which input

The four HDMI inputs are printed with source names: CBL/SAT, MEDIA PLAYER, Blu-ray, and GAME. Denon’s advice is to connect devices to match the names printed on the inputs. Then one press of an input button brings up the right device.

Chart of AVR-S570BT inputs: four HDMI inputs named CBL/SAT, Media Player, Blu-ray, and Game; OPTICAL1, OPTICAL2, and COAXIAL defaulting to TV Audio, AUX, and CBL/SAT; and the four Quick Select defaults
Only the optical and coaxial jacks can be moved to a different source. Quick Select buttons give any input a one-press shortcut.

The other sources you’ll see include TV Audio (sound from your TV over eARC or ARC, or through OPTICAL1), AUX, Bluetooth, USB, and the FM/AM tuner. For how TV Audio gets its sound, see our guide to connecting the S570BT to a TV with eARC or ARC.

Match your devices to the HDMI inputs

Denon recommends HDMI for any device that has it, because one cable carries both picture and sound.

Your deviceHDMI input to use
Cable or satellite boxCBL/SAT
Streaming stick or boxMEDIA PLAYER
Blu-ray or DVD playerBlu-ray
Game consoleGAME

Have two consoles and no cable box? Put the second one on CBL/SAT. It will show up under that name, and it will work normally. Since the S570BT can’t rename it, a Quick Select button (below) is the tidiest way to call it up.

How to reassign an optical or coaxial jack (Input Assign)

The receiver has three digital audio jacks, and each one is tied to a source out of the box. Input Assign lets you change that. Denon says to change the assignment whenever you plug in a device that’s different from the name printed by the jack.

JackDefault source
OPTICAL1TV Audio
OPTICAL2AUX
COAXIALCBL/SAT

Each jack can be given to TV Audio, CBL/SAT, Media Player, Blu-ray, Game, or AUX.

For example, say an older game console only has an optical output. You plug it into OPTICAL2, but OPTICAL2 belongs to AUX. Assign OPTICAL2 to Game, and the console’s sound plays when you select Game.

  1. Press SETUP on the remote. The menu opens on your TV.
  2. Select Inputs, then press ENTER.
  3. Select Input Assign, then press ENTER.
  4. Find the jack you plugged into (OPTICAL1, OPTICAL2, or COAXIAL) and change it to the source you want.
AVR-S570BT Input Assign screen with the OPTICAL2 jack being reassigned
Recreated menu. Change the jack you used to the source you want it to feed.
  1. Press SETUP to close the menu.
  2. Select that source and play something to test it.

To undo everything, choose Set Defaults in Input Assign. That puts all three jacks back to their factory sources.

If the device is still silent, check its own settings. Denon notes that some devices ship with their digital audio output turned off.

Fix a device that’s louder or quieter than the rest (Source Level)

Some sources play noticeably louder or softer than others at the same volume setting. Source Level corrects the playback level of one input so you don’t have to keep adjusting the volume.

  1. Switch to the input you want to adjust.
  2. Press SETUP, then go to Inputs > Source Level.
  3. Set a value between –12 dB and +12 dB. The default is 0 dB. Raise it for a quiet device and lower it for a loud one.
AVR-S570BT Source Level screen with the GAME input raised to +3 dB
Recreated menu. Raise or lower one input between –12 and +12 dB to match the others.

The receiver saves Source Level separately for each input, so the change affects only the one you adjusted.

Choose the connection an input uses (Input Select)

Input Select has two settings, and the receiver saves both separately for each input. For most setups, leave both on Auto.

SettingOptions (default in bold)When to change it
Input ModeAuto, HDMI, Digital, AnalogAuto finds and plays whatever signal comes in. Pick one type to force the receiver to use only that connection.
Decode ModeAuto, PCM, DTSAuto detects the digital format. PCM or DTS decodes only that format.
AVR-S570BT Input Select screen with Input Mode options Auto, HDMI, Digital and Analog
Recreated menu. Leave Input Mode on Auto unless you need to force a connection.

Decode Mode only applies to inputs that use HDMI or have a COAXIAL, OPTICAL1, or OPTICAL2 jack assigned. If your TV is connected with ARC or eARC, the TV Audio input’s Input Mode is locked, so you can’t change it.

A wrong Input Mode is a common cause of a silent input. If one device plays nothing, set its Input Mode back to Auto. Our S570BT no-sound checklist covers the other causes.

Make one-press shortcuts with Quick Select

This is the closest thing the S570BT has to custom inputs. The remote has four QUICK SELECT buttons. Each one can recall an input along with your preferred volume and sound mode. Out of the box they’re set like this:

ButtonDefault input
QUICK SELECT 1CBL/SAT
QUICK SELECT 2Blu-ray
QUICK SELECT 3Game
QUICK SELECT 4Bluetooth

Denon notes that the factory presets don’t include a volume level.

Save your own Quick Select

  1. Select the input you want, then set the volume and sound mode the way you like them.
  2. Press and hold the QUICK SELECT button you want to use.
  3. Keep holding until the display shows “Quick” and the button’s number, followed by “Memory.” Your settings are now saved to that button.
AVR-S570BT front display confirming a Quick Select memory was saved
Generated illustrative recreation. Keep holding the button until the display confirms the memory is saved.

Press that button any time to jump straight back to those settings. If you save while listening to FM or AM, the current station is saved too.

Choose what Quick Select saves

By default, a Quick Select saves the input source, master volume, sound mode, channel levels, Restorer, playback content, and Room EQ. If you don’t want a button to change the volume, turn that item off:

  1. Press SETUP, then go to General > Quick Select Options.
  2. Pick the Quick Select you want to change. The options are set separately for each button.
  3. Set Master Volume (or any other item) to Disabled.

A Disabled item isn’t saved when you store the button, and it isn’t changed when you press it. If you disable Input Source, the button won’t save Video Select either. To start over, choose Set Defaults.

Show a picture while you listen (Video Select)

When you play USB, FM, AM, or Bluetooth, the TV has nothing to show. Video Select lets you display video from another input while that audio plays. Press OPTION, choose Video Select, set it to On, and pick the video source. It’s Off by default and saved separately for each audio input.

When the receiver switches inputs on its own

An input that changes by itself usually comes from one of two automatic settings, not from a fault:

  • It jumps to TV Audio. With HDMI Control on, TV Audio Switching (under Video > HDMI Setup) selects TV Audio when the TV sends a command. Set it to Off if that gets in the way.
  • It jumps to Bluetooth. Bluetooth’s Auto-Select setting switches to the Bluetooth input when a paired phone connects. Our S570BT Bluetooth guide explains that setting and the trade-off.

Denon’s own pages cover Input Assign and changing Quick Select settings in the AVR-S570BT online manual.

More guides for the Denon AVR-S570BT